Product packaging: Installation instructions:1. Clean the car body, evenly spray water on the car body parts to be attached-to reduce the viscosity of the sticker and facilitate the position adjustment;2. Determine the location where you need to paste. Slowly stick it and gently scrape it with a tool while peeling the transfer film (translucent paper shown);3. When encountering door handles or anti-scratch strips, cut and wrap the materials according to the situation;4. After proper adjustment, after confirming the general position of the graphics, remove the water and air bubbles repeatedly. Remove the transparent transfer film;5. Don't let the sticker and car body have any separation or protrusion;6. Try to let the moisture in the car stickers dry completely, and heat and dry in moderation if possible. Depending on the weather, wash your car after a day or two. FoldAfter-sales service: If you have any questions about our products, please feel free to contact us, we will serve you at any time. If you have any questions about our products, please feel free to contact us, we will serve you at any time.