1.Ensure that the surface that you intend to apply glue to be clean,dry and free from grease or other contaminats that may affect the strength of the glue bond.
2.Plug the glue Gun stick into a 110v or 230v electrical outlet.
3. After you have waited approximately 5-8 minutes, squeeze the trigger of the glue gun until the melt glue begines to flow frome the muzzle.
4.Insert a glue stick into the round hole at the back of the gun,sqeeze the trigger on the glue gun a few times to push the glue stick into the glue gun until it is firmly engaged with the heating element insides the glue gun.
5.As the glue Stick is melted by the glue gun further glue sticks can be inserted into the gun.Do not worry about glue left in the glue gun after use and will re-melt and be used the next time you use your glue gun.
6.Once you have finished using your glue gun unpluge it and allow it to cool before stroring.