HIOKI Earth Tester is a tough and ready-for-the-field, IP67 dustproof and waterproof earth testing meter. Labtex provides the original Hioki Earth Tester at a reasonable price in Bangladesh. \n

Key Features of HIOKI Earth Tester

\n

\n
• IP67 protected – top of the industry
\n
• Test all ground types from Class A to Class D with a single-meter
\n
• Wide 0 Ω to 2000 Ω measurement range
\n
• Minimize cabling time with innovative earthing rods and cable winder
\n
• Model: FT6031-50
\n
• Brand: HIOKI
\n
• Made in Japan
\n

\n

Basic specifications of HIOKI Earth Tester

\nAccuracy Warranty: 1 Year. To ensure safety, use the optional Test Lead L9787 when making measurements using the two-electrode method. \n \n

Dustproof and waterproof enclosure for robust performance in the field

\nSince the FT6031’s enclosure is designed to keep out dust, it can be used with peace of mind in settings where it would be exposed to mud and dust. And if the instrument gets dirty, it can be rinsed clean with water. \n \n \n

Using a grounding resistance meter: Two- and three-pole methods

\nYou can select from two grounding resistance measurement methods (two-pole or three-pole). \nThe instrument switches the internal connection automatically when the selection key is pressed, so there’s no need to connect a short bar or other fixture. \n \nThree-pole method: Measure grounding resistance after inserting supplemental grounding rods into the ground. \n \nTwo-pole method: Measure grounding resistance using the Class B ground of a pole-mounted transformer. \n \n \n

Dramatically faster measurement setup thanks to superior ease of use and digital operation

\nThe FT6031’s supplemental grounding rods are thinner than previous products, making it easier to insert them into and remove them from, the ground. The rods are made of rigid, corrosion-resistant stainless steel. In addition, the allowable resistance of the supplemental grounding electrodes has been increased by a factor of 10. This enhancement eliminates the inconvenience of setting and resetting the rods over and over again when the allowable resistance is exceeded, for example in dry soil conditions. \n \n \n

Digital grounding resistance meter featuring easy operation

\nThe FT6031 is extremely easy to operate: just press the MEASURE key. The instrument will automatically complete the following sequence of operations: ground potential check → supplemental grounding electrode check → grounding resistance measurement. Auto-range operation eliminates the need to switch ranges since the instrument automatically selects the optimal range. \n \n

\n
• Digital Earth Tester
\n
• Model: FT6031-50
\n
• Brand: HIOKI
\n
• Made in Japan
\n