\n
• Display Format: OLED Display
\n
• SpO2 Measuring Range: 0%-100%
\n
• Pulse Wave Display: Calibration Display and the waveform display.
\n
• Power Requirements: 2x1.5v AAA Battery
\n
• Power Consumption: Smaller than 30mA
\n
• Resolution: 1% for SpO2 and 1 bpm for Pulse Rate.
\n
• Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when the pulse-filling ratio is 0.4%. The SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger).
\n
• Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of the darkroom is less than ±1%.
\n
• It is equipped with a function switch. The Oximeter can be powered off in case no finger is in the oximeter within 5 seconds.
\n
• Optical Sensor: Red light (wavelength is 660nm, 6.6mW) & Infrared (wavelength is 880nm, 6.75mW)
\n

Accessories of Fingertip Pulse Oximeter

\n
• One hanging rope.
\n
• Two batteries (optional)
\n
• One User Manual
\n

\n
• Fingertip Pulse Oximeter
\n
• For Human
\n
• Made in China
\n