DC 3V-6V Mini Micro Submersible Water Pump Low Noise Motor Pump 120L/H 1.1M Micro Brushless Magnetic Driving Pump - Submersible Water Pump - White

DC Voltage: 2.5-6V

Working current: 130-220mA

Power: 0.4-1.5W

Maximum lift: 40-110cm / 15.75"-43.4"

Flow rate: 80-120L/H

Outside diameter of water outlet: approx. 7.5mm / 0.3"

Inside diameter of water outlet: approx. 4.7mm / 0.18"

Diameter: approx. 24mm / 0.95"

Length: approx. 45mm / 1.8"

Height: approx. 33mm / 1.30"

Wire length: about 15-20cm (red: " + ", black(white): " - ")

Material: engineering plastic

Driving mode: brushless DC design, magnetic driving

Continuous working life of 500 hours

This is a low cost, small size Submersible Pump Motor which can be operated from a 2.5 ~ 6V power supply. It can take up to 120 liters per hour with very low current consumption of 220mA. Just connect tube pipe to the motor outlet, submerge it in water and power it. Make sure that the water level is always higher than the motor. Dry run may damage the motor due to heating and it will also produce noise.