Type-C QC AFC PD2.0 PD3.0 to DC Spoof Scam Fast Charge Trigger Polling Detector USB-PD Notebook Power Supply Change Board Module Purple

Brand
Category:
SKU: INSP1093885
Manufacturer: No Brand
Seller: KeentechBD

Tk 200

Type-C QC AFC PD2.0 PD3.0 to DC Spoof Scam Fast Charge Trigger Polling Detector USB-PD Notebook Power Supply Change Board Module

Description:

:1: stable performance

:2: Simple installation

:3: Wide application

:4: Safe and reliable

:5: Support 5V 9V 12V 15V 20V fixed voltage output


Specification:

:Support induced 5V, 9V, 12V, 15V, 20V voltage

:Fast charge support protocol: PD2.0/PD3.0, QC2.0/QC3.0, AFC

:Support voltage: 5V, 9V, 12V, 15V, 20V (voltage step is not supported)

:Voltage adjustment method: According to the table on the back of the board, adjust the DIP switch to control the voltage output

:Size: 3.1*2*cm

:Net weight: 2.9g

:1. After adjusting the DIP switch, because there is no voltage indicator, it is recommended to use a multimeter to measure the voltage before connecting to the application circuit.

:2. If the DIP switch is not adjusted according to the table, the module will output any one of the above voltages.


Package Contents:

:1*PD/QC/AFC fast charge decoy trigger

Only the above package content, other products are not included.

Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.




Type-C QC AFC PD2.0 PD3.0 to DC Spoof Scam Fast Charge Trigger Polling Detector USB-PD Notebook Power Supply Change Board Module

Description:

:1: stable performance

:2: Simple installation

:3: Wide application

:4: Safe and reliable

:5: Support 5V 9V 12V 15V 20V fixed voltage output

Specification:

:Support induced 5V, 9V, 12V, 15V, 20V voltage

:Fast charge support protocol: PD2.0/PD3.0, QC2.0/QC3.0, AFC

:Support voltage: 5V, 9V, 12V, 15V, 20V (voltage step is not supported)

:Voltage adjustment method: According to the table on the back of the board, adjust the DIP switch to control the voltage output

:Size: 3.1*2*cm

:Net weight: 2.9g

:1. After adjusting the DIP switch, because there is no voltage indicator, it is recommended to use a multimeter to measure the voltage before connecting to the application circuit.

:2. If the DIP switch is not adjusted according to the table, the module will output any one of the above voltages.

Package Contents:

:1*PD/QC/AFC fast charge decoy trigger

Only the above package content, other products are not included.

Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Customer Questions and answers :

Login to ask a question