Optimum for modern Asian and American gasoline engines with multi-valve technology and turbocharging with and without charge air cooling. For the protection and value conservation of the engine during long intervals between oil changes and when there are extreme engine requirements.

Low-viscosity high-tech low-friction motor oil with high shear stability. Combined with innovative additive technology and the special Molygen additive. Reliably prevents the formation of deposits, reduces frictional losses in the engine and provides optimum protection against wear. The results are savings in fuel and an extended service life for the engine.

Application:The operating instructions of the vehicle and engine manufacturers must be followed. Can be mixed with all commercially-available motor oils. Optimum effect obtained only when used on its own (i.e. no mixing).

APPROVALS:API SPILSAC GF-6A

LIQUI MOLY also recommends this product for Vehicles or Assemblies for which the following specifications or original part numbers are required:ChryslerChrysler MS-6395DaihatsuFiat 9.55535-CR1FordFord WSS-M2C 946-AFord WSS-M2C 946-B1Ford WSS-M2C 961-A1GM 6094 MGM dexos1 Gen 2HondaHyundaiIsuzuKiaMazdaMitsubishiNissanSubaruSuzukiToyota