Picture of CNC SHIELD V3 EXPANSION BOARD FOR ARDUINO 3D PRINTER (Multicolor)
Picture of CNC SHIELD V3 EXPANSION BOARD FOR ARDUINO 3D PRINTER (Multicolor)

CNC SHIELD V3 EXPANSION BOARD FOR ARDUINO 3D PRINTER (Multicolor)

Category: Electrical Accessories
SKU: PONS841611
Seller: Ponno shopping
Tk 240
Tk 450
Tk 450
47% OFF
0 review(s)
  • CNC Shield Board:
  • Latest CNC Shield Version 3
  • 0.9 compatible. GRBL (open source firmware that runs on an uno that turns the G-code commands into stepper 37signals)
  • PWM Spindle and direction pins
  • 4-Axis support (X, Y, Z, A-Can duplicate X, Y Z, or do a full 4th axis with custom firmware using pins D12 and D13)
  • 2 x End stops for each axis (6 in total)
  • Coolant enable
  • Uses removable A4988 or DRV8825 compatible stepper drivers
  • Jumpers to set the Micro-Stepping for the stepper. (some drivers like the DRV8825 can do up to 1 / 32 micro-stepping)
  • Compact design.
  • Stepper Motors can be connected with pin Molex connectors or soldered 4 in place.
  • Runs on 12-36v DC. (at the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the.)

Call For Order : 09613-800800
  • CNC Shield Board:
  • Latest CNC Shield Version 3
  • 0.9 compatible. GRBL (open source firmware that runs on an uno that turns the G-code commands into stepper 37signals)
  • PWM Spindle and direction pins
  • 4-Axis support (X, Y, Z, A-Can duplicate X, Y Z, or do a full 4th axis with custom firmware using pins D12 and D13)
  • 2 x End stops for each axis (6 in total)
  • Coolant enable
  • Uses removable A4988 or DRV8825 compatible stepper drivers
  • Jumpers to set the Micro-Stepping for the stepper. (some drivers like the DRV8825 can do up to 1 / 32 micro-stepping)
  • Compact design.
  • Stepper Motors can be connected with pin Molex connectors or soldered 4 in place.
  • Runs on 12-36v DC. (at the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the.)





  • CNC Shield Board:
  • Latest CNC Shield Version 3
  • 0.9 compatible. GRBL (open source firmware that runs on an uno that turns the G-code commands into stepper 37signals)
  • PWM Spindle and direction pins
  • 4-Axis support (X, Y, Z, A-Can duplicate X, Y Z, or do a full 4th axis with custom firmware using pins D12 and D13)
  • 2 x End stops for each axis (6 in total)
  • Coolant enable
  • Uses removable A4988 or DRV8825 compatible stepper drivers
  • Jumpers to set the Micro-Stepping for the stepper. (some drivers like the DRV8825 can do up to 1 / 32 micro-stepping)
  • Compact design.
  • Stepper Motors can be connected with pin Molex connectors or soldered 4 in place.
  • Runs on 12-36v DC. (at the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the.)
Customer Questions and answers :

Login to ask a question