Picture of CNC SHIELD BOARD + 4PCS A4988 STEPPER MOTOR DRIVER FOR ARDUINO 3D PRINTER (Multicolor)
Picture of CNC SHIELD BOARD + 4PCS A4988 STEPPER MOTOR DRIVER FOR ARDUINO 3D PRINTER (Multicolor)

CNC SHIELD BOARD + 4PCS A4988 STEPPER MOTOR DRIVER FOR ARDUINO 3D PRINTER (Multicolor)

Category: Electrical Accessories
SKU: PONS841523
Seller: Ponno shopping
Tk 720
Tk 1,000
Tk 1,000
28% OFF
0 review(s)
  • CNC Expansion Board
  • Version: V3.0
  • Color: Red
  • Size: 68 x 53 x 18mm / 2.67 x 2.08 x 0.7in
  • Voltage: DC 12V to 36V (only DRV8825 driver can handle up to 36V, so please consider voltage for power supply)
  • 4pcs A4988 Driver
  • Color: Red
  • Size: 20 x 15mm / 0.78 x 0.59in
  • Thermal Shutdown Circuit: Yes
  • Cross Current Protection: Yes
  • Ground Fault Protection: Yes
  • Short Circuit Protection: Yes
  • Compatible Logic Voltage: 3.3V and 5V
  • Five Step Modes: Full, 1/2, 1/4, 1/8 and 1/16
  • Mix with slow current attenuation model.
  • Internal UVLO and low RDS (on) output.
  • Automatic current attenuation mode Detection/Select.
  • Phase-in rectifier, low power consumption.
  • Warning: Connecting or disconnecting stepping motor while driver is powered on might damage driver.
  • 4pcs Heat Sinks
  • Size: 8 x 8mm / 0.31 x 0.31in
  • 1 x V3 Extension Board
  • 4 x Drivers
  • 4 x Heat Sinks

Call For Order : 09613-800800
  • CNC Expansion Board
  • Version: V3.0
  • Color: Red
  • Size: 68 x 53 x 18mm / 2.67 x 2.08 x 0.7in
  • Voltage: DC 12V to 36V (only DRV8825 driver can handle up to 36V, so please consider voltage for power supply)
  • 4pcs A4988 Driver
  • Color: Red
  • Size: 20 x 15mm / 0.78 x 0.59in
  • Thermal Shutdown Circuit: Yes
  • Cross Current Protection: Yes
  • Ground Fault Protection: Yes
  • Short Circuit Protection: Yes
  • Compatible Logic Voltage: 3.3V and 5V
  • Five Step Modes: Full, 1/2, 1/4, 1/8 and 1/16
  • Mix with slow current attenuation model.
  • Internal UVLO and low RDS (on) output.
  • Automatic current attenuation mode Detection/Select.
  • Phase-in rectifier, low power consumption.
  • Warning: Connecting or disconnecting stepping motor while driver is powered on might damage driver.
  • 4pcs Heat Sinks
  • Size: 8 x 8mm / 0.31 x 0.31in
  • 1 x V3 Extension Board
  • 4 x Drivers
  • 4 x Heat Sinks





  • CNC Expansion Board
  • Version: V3.0
  • Color: Red
  • Size: 68 x 53 x 18mm / 2.67 x 2.08 x 0.7in
  • Voltage: DC 12V to 36V (only DRV8825 driver can handle up to 36V, so please consider voltage for power supply)
  • 4pcs A4988 Driver
  • Color: Red
  • Size: 20 x 15mm / 0.78 x 0.59in
  • Thermal Shutdown Circuit: Yes
  • Cross Current Protection: Yes
  • Ground Fault Protection: Yes
  • Short Circuit Protection: Yes
  • Compatible Logic Voltage: 3.3V and 5V
  • Five Step Modes: Full, 1/2, 1/4, 1/8 and 1/16
  • Mix with slow current attenuation model.
  • Internal UVLO and low RDS (on) output.
  • Automatic current attenuation mode Detection/Select.
  • Phase-in rectifier, low power consumption.
  • Warning: Connecting or disconnecting stepping motor while driver is powered on might damage driver.
  • 4pcs Heat Sinks
  • Size: 8 x 8mm / 0.31 x 0.31in
  • 1 x V3 Extension Board
  • 4 x Drivers
  • 4 x Heat Sinks
Customer Questions and answers :

Login to ask a question