Al Inside ESP8266 Serial ESP-01 ESP8266 Module Compatible With Arduino Uno Projects (Multicolor)

SKU: PONS841800
Seller: Ponno shopping

Tk 231
Tk 350
Tk 350
34% OFF
  • 802.11 b/g/n protocol
  • Wi-Fi 2.4 GHz, support WPA/WPA2
  • Super small module size (11.5mm x 11.5mm)
  • Integrated 10-bit ADC
  • Integrated TCP/IP protocol stack (ipv4 only at the moment)
  • Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, and power management units
  • +20dBm output power in 802.11b mode
  • Supports antenna diversity
  • Deep sleep power <10uA, Power down leakage current < 5uA
  • Integrated low power 32-bit MCU
  • SDIO 2.0, SPI, UART, I2C
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4μs guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (



  • 802.11 b/g/n protocol
  • Wi-Fi 2.4 GHz, support WPA/WPA2
  • Super small module size (11.5mm x 11.5mm)
  • Integrated 10-bit ADC
  • Integrated TCP/IP protocol stack (ipv4 only at the moment)
  • Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, and power management units
  • +20dBm output power in 802.11b mode
  • Supports antenna diversity
  • Deep sleep power <10uA, Power down leakage current < 5uA
  • Integrated low power 32-bit MCU
  • SDIO 2.0, SPI, UART, I2C
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4μs guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (





  • 802.11 b/g/n protocol
  • Wi-Fi 2.4 GHz, support WPA/WPA2
  • Super small module size (11.5mm x 11.5mm)
  • Integrated 10-bit ADC
  • Integrated TCP/IP protocol stack (ipv4 only at the moment)
  • Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, and power management units
  • +20dBm output power in 802.11b mode
  • Supports antenna diversity
  • Deep sleep power <10uA, Power down leakage current < 5uA
  • Integrated low power 32-bit MCU
  • SDIO 2.0, SPI, UART, I2C
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4μs guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (
Customer Questions and answers :

Login to ask a question