12V 20Amp SMPS AC 220V To DC 12V 20A Switching Mode Power Supply Adapters Charger SMPS Power Supply 12V 20A For Industrial 3D Printers CNC Machine 20A 12V SMPS

Category: Others
SKU: UDBD06030
Seller: Udvabony BD

Tk 1,193
Tk 1,404
Tk 1,404
15% OFF
  • Input Voltage: AC 100 – 264V 50 / 60Hz
  • Output Voltage:DC12V
  • Output Current:20A
  • Work efficiency: 89 (%)
  • Output voltage accuracy: 5%
  • Voltage adjustment rate:  5%
  • Load adjustment rate: 5%
  • Working Temperature: 0~40C
  • Storage Temperature: -20~60C
  • Ambient Humidity:  0~95% Non-Condensation
  • Protection: Short circuit/Over load/Over voltage
  • Shell Material: Metal case/Aluminum base.
  • Color: Sliver



Description: SMPS AC 220v To DC 12V 20A Switching Mode Power Supply Adapter Charger For Electronic Project Industrial Security Camera

Aswitched mode power supplyis an electronicpower supplythat incorporates a switching regulator toconvert electrical powerefficiently. Like other power supplies, an SMPS transfers power from a source, likemains powerto a load, such as apersonal computer, while convertingvoltageandcurrentcharacteristics. Unlike alinear power supply, the pass transistor of a switching-mode supply continually switches between low-dissipation, full-on and full-off states, and spends very little time in the high dissipation transitions, which minimizes wasted energy. Ideally, a switched-mode power supply dissipates no power.Voltage regulationis achieved by varying the ratio of on-to-off time. In contrast, a linear power supply regulates the output voltage by continually dissipating power in the passtransistor. This higher power conversion efficiency is an important advantage of a switched-mode power supply. Switched-mode power supplies may also be substantially smaller and lighter than a linear supply due to the smaller transformer size and weight.

Switching regulators are used as replacements for linear regulators when higher efficiency, smaller size or lighter weight are required.

Specification:

  • Input Voltage: AC 100 – 264V 50 / 60Hz
  • Output Voltage:DC12V
  • Output Current:20A
  • Work efficiency: 89 (%)
  • Output voltage accuracy: 5%
  • Voltage adjustment rate: 5%
  • Load adjustment rate: 5%
  • WorkingTemperature:0~40C
  • StorageTemperature:-20~60C
  • AmbientHumidity:0~95%Non-Condensation
  • Protection: Short circuit/Over load/Over voltage
  • Shell Material: Metal case/Aluminum base.
  • Color: Sliver

Features;

  • 100% Full Load Burn-in Test
  • Cooling by Free Air Convection
  • High Quality and High Performance
  • LED power supply with a metal body for hidden installation for LED lighting
  • Design with Built-in EMI Filter, improve signal precision.
  • Certifications: CE & RoHs
  • No Minimum Load.
  • Compact Size Light Weight.
  • High Efficiency, low energy consumption
  • Protection: Shortage Protection, Overload Protection, Over Voltage Protection
  • Safety Compliance CE and RoHS, a reliable switching power supply with high quality material, durable and safety in use. High efficiency and stable performance
  • Wide input voltage range, steady and precise output voltage. Great power transformer for electronic equipment, Led Lighting, home appliance, Radio, Security cameras, Computer etc.
  • Imported components, high reliability. Built-in WMI filter, anti-jamming performance.
  • DC ripple is small, high efficiency. Design soft-start circuit, AC surge current limit.
  • Low operating temperature and long service life. Wide input voltage range, in line with global standards.
  • Insulation performance, high electrical strength. With short circuit, overload, overvoltage, protection.

Wiring:

  • ● L, N, GND: AC power input
  • ● +V: DC power output “+”
  • ● -V: DC power output “-”
  • ● +V / ADJ: fine adjustment of output voltage

Note:

  • 1.This Power Supply is only suitable for indoor use, non-detachable power shell.
  • 2.External power supply round hole mesh heat vents, in the range of 50cm within the outlet Do not place other flammable items.
  • 3.Don’t place other items in the product range of 5 cm, to ensure the power supply with good thermal environment and safety.
  • 4.Please accurately calculate the load power but not overload. Don’t touch the case during the power is working.
  • 5.Do not short-circuit output if no output, please use off one minute re-energized.
  • 6.Carefully verify the power link is correct, rigorous power lines reversed before use it.
  • 7.Professional installation of qualified electrician is highly recommended.






  • Input Voltage: AC 100 – 264V 50 / 60Hz
  • Output Voltage:DC12V
  • Output Current:20A
  • Work efficiency: 89 (%)
  • Output voltage accuracy: 5%
  • Voltage adjustment rate:  5%
  • Load adjustment rate: 5%
  • Working Temperature: 0~40C
  • Storage Temperature: -20~60C
  • Ambient Humidity:  0~95% Non-Condensation
  • Protection: Short circuit/Over load/Over voltage
  • Shell Material: Metal case/Aluminum base.
  • Color: Sliver
Customer Questions and answers :

Login to ask a question